Top 10k strings from Tasword +3 (1987)(Tasman Software)(Side B).dsk in <root> / bin / z80 / software / Sinclair Spectrum Collection TOSEC.exe / Sinclair ZX Spectrum - Utilities & Educational / Sinclair ZX Spectrum - Utilities & Educational - [DSK] (TOSEC-v2007-01-01) /
Back to the directory listing
30 Track-Info
11 TEXT1 TXT
9 TEXT2 TXT
9 TC3 BIN
9 TC2 BIN
8 TAS
8 T2T3 BIN
6 k+,-./012345678
6 TC1 BIN
6 TASTABLEBIN
6 TASSPEL1BIN
6 T2T3
6 RUNS
5 ________________________________________________________________
5 TSPELL2 BIN
5 TSPELL1 BAK
5 TASSPEL1BAK
5 README TXT
5 DICT45 BIN
5 !"#$%&'()*
4 TW2CODE BIN
4 TSPELL1 BIN
4 SERIAL
4 DICT44 BIN
4 "7";"Loading Tasword":
3 press ENTER. The program then asks if the text file is a TASWORD
3 name for the file that is to be saved to disc. Type a name and
3 k,-./0123456789
3 and pressing ENTER. Then press the PLAY button on the cassette
3 Tasword Plus Three disc by typing:
3 PARALLEL
3 After the tape file has loaded the program asks you to type the
3 "a parallel printer"
3 "If you are unable to drive"
3 LOAD "T2T3"
2 your program can be determined by pressing SYMBOL SHIFT and A to
2 type RUN to restart Tasword.
2 the text. Try EDIT now.
2 the display up through the text towards the beginning. Use
2 tape to disc. It is assumed that the tape text file has been
2 saved from one of:
2 same way as shown above. This will create a Tasword that will
2 products that will be on view at the London Computer Show.
2 printer port. Such printers will not print when using Basic
2 or N for No if it is a text file from some other Tasword.
2 number is shown in line 1 of the Basic program. You should then
2 message telling you to stop.
2 made after SERIAL has been run will drive the serial port
2 has been modified to drive these printers. The version number of
2 go to the Main Menu and then B to enter BASIC. The version
2 en the help page is showing to return to
2 effects of SERIAL you should run a program caled PARALLEL in the
2 drive all known parallel prinsword text file from tape to disc reset the
2 drive most parallel printers. If you need to reverse the
2 display down through the text file.
2 computer and select +3 Basic. Load the program T2T3 from the
2 called SERIAL from te Tasword disc as follows:
2 another part of the help page. Try it.
2 Yours sincerely,
2 Yours faithfully,
2 You will have discovered that SYMBOL SHIFT F "scrolls" the
2 You need only run SERIAL once. A customised copy of Tasword
2 When the help page is showing you can press EDIT again to view
2 To transfer a Tarogram option from the main
2 To drive these printers from BASIC type the following when in +3
2 This section describes how to transfer Tasword text files from
2 The program then transfers the text file to disc and returns to
2 The opposite to SYMBOL SHIFT F is SYMBOL SHIFT G which scrolls
2 The enclosed brochures describe just some of the interesting new
2 The Show Manager
2 TUTOR TXT
2 TTABLE.BIN;)
2 TEXT5 TXT
2 TEXT4 TXT
2 TEXT3 TXT
2 Simon Howarth
2 RUN BAK
2 RUN
2 Printers known to require this modification are Star LC-10,
2 PRINTFIXBAS
2 PLUS THREE AND SAVE IT OUT AGAIN.
2 Now press SYMBOL SHIFT F and keep pressing it until you see a
2 NYPSMSCSTBSPtasprint.bin
2 Load the program T2T3 from the
2 LPRINT statements. The latest version of Tasword (version 2.06)
2 In order to drive a serial printer you must first load a program
2 Hoping to see you there.
2 Ensure the Tasword disc is in drive A, and press any key.
2 DWThis option will corrupt the text file. Do you wish to continue. (Y/N).
2 DICT25 BIN
2 DICT09 BIN
2 Citizen 120-D and the MT 80+.
2 Basic. To transfer more files type RUN and press ENTER.
2 BEFORE EDITING YOUR TEXT FILE YOU SHOULD LOAD IT INTO TASWORD
2 A Tasword that has been modified for serial printers will also
2 ========================================================
2 ====================================
2 =================================
2 ===========================
2 )))))))DM*Q
2 ) commands are used to set the
2 (iii) Type load "run" to load Tasword in the usual way
2 (ii) Type load "serial" and press ENTER
2 (i) Select +3 BASIC from the computer's opening menu
2 (b) The references to page 00 on pages 53 and 64 should refer to
2 (a) Page 11. The list of files on the program disc should be
2 (8) DRIVING PARALLEL PRINTERS
2 (4) DRIVING SERIAL PRINTERS
2 (2) TRANSFERRING TEXT FILES FROM OTHER SPECTRUM TASWORDS
2 (1) AMENDMENTS TO THE PROGRAM MANUAL
2 "you should try LOAD 'PARALLEL'"
2 "to set the baud rate etc."
2 "this program."
2 "tastable.bin"
2 "printfix"
2 "it was not necessary to run"
2 "for details."
2 "This side of the disc will now"
2 "See the Tasword README file"
2 "If the message":
2 "'File already exists' appears"
2 symbol. The
2 page 55.
2 extended to include the following additional files:
2 menu to set the baud rate etc.
2 The
2 TASWORD TWO
2 TASWORD THREE
2 TASWORD PLUS TWO
2 TASWORD 128
2 TW2CODE.BIN
2 TW
2 TASTABLE.BIN
2 RUN2
2 PRINTFIX
1 ~&Track-Info
1 ||````||>>
1 you pass the "STOP PRESSING SYMBOL SHIFT F" message at the
1 you correct and change your text and is nothing to worry about
1 xt file V
1 wp 23354,62: POKE 23355,16 <Enter>
1 works in a different way to DELETE in that it deletes the
1 word to be inserted.
1 word README file"
1 will see a message at the bottom of the screen Track-Info
1 when you have finished experimenting.
1 watching what happens each time you press it.
1 w\@MSstart page number (
1 w\ TBat middle/sides M/S (
1 version 2.06 of 040489
1 version 2.05 of 10/3/89
1 turn insert mode off.
1 top of the screen by using INV VIDEO to scroll down and TRUE
1 to confirm or
1 this tutor and see what these commands do.
1 the tutorial sessions using the example files on the program
1 the start of the blank line above this paragraph and then press
1 the screen.
1 the paragraph.
1 the margin commands.
1 the line undelete key. It recovers the most recently deleted
1 the line above which you want the block moved to and pressing
1 the letters on the bottom line of the screen become capitals to
1 the help page to see which commands have not been covered in
1 the first line of the paragraph and use
1 the cursor to what will bing keys and the
1 the cursor to the end of
1 the cursor right one character position. The SYMBOL SHIFT Q key
1 the cursor just in front of the numbers in this paragraph and
1 the cursor in the middle of this paragraph to see how auto
1 the current margins whatever the margins were set at when the
1 the correct character. Do this now to correct the spelling
1 the EXTEND MODE key. The bottom line of the screen flashes to
1 the "Insert" message on the bottom line of the screen change to
1 text into the middle of some existing text. Move the cursor to
1 text and then use SYMBOL SHIFT F again to scroll back down until
1 ters but will not drive serial
1 tape to position of the text file to transfer to disc then press play"
1 supplements the program manual.
1 start of a page and to the next page, then you will have moved
1 start at line (1)
1 special symbol marking the line that thePLUS3DOS
1 side. Then scroll on down.
1 show when you are in Extended Mode.
1 show the tab stop positions. The SYMB Y keys.
1 show that insert mode is on. Now type two or three lines of text
1 should read the relevant section of the manual and work through
1 set at column 128 which is the maximum possible value.
1 serial to parallel
1 sequence for (ENTER if finished)
1 screen. You are going to learn to use SYMBOL SHs.
1 save Tasword option
1 save Tasword T
1 replace paper - press any key when ready
1 remind you that capitals lock is set. Every letter you type will
1 reName file on disc N
1 rTrack-Info
1 print your text. You can see on the screen where one page will
1 print with Data merge D
1 pressed. Press ENTER whPLUS3DOS
1 press ENTER to confirm or DELETE to change
1 press EDIT to quit printing
1 position. See if you can use the cursor movthe tutor
1 passed on your request for a demonstration at your premises to
1 parallel to serial
1 paragraph. Remember that you can use
1 paragraph.
1 paragraph, press extend-J and watch what
1 paragraph was typed. Press
1 page break display on and you will see the "Pg/Bk" message
1 our sales office and a sales engineer will visit you on
1 or press EDIT to quit
1 on again by repeating the proceseen. You
1 of our damaged computer. Please proceed with the work at your
1 of each line when insert mode is on. Finish by pressing
1 number of copies (
1 now be a capital letter. To turn capitals lock off press CAPS
1 ngle Letter Trapping
1 new text is inserted immediately left of the often as
1 moves the text that is to the left of the cursor left one
1 mistake in this paragraph.
1 middle of a sentence or paragraph. When auto-insert mode is on
1 means press the EXTEND MODE key, hold the SYMBOL SHIFT key down
1 me of text file for renaming?
1 main menu"
1 line that the cursor is on as the last line of a block.
1 line and puts in on a new line which is created above the line
1 last altered 19th february 1988
1 key. Tasword saves the marked block of text to disc as a text
1 key splits the line at the current cursor position to allow a
1 justification of the paragraphs. This will happen quite wed by SYMBOL SHIFT and I). You will see
1 it shows the part containing the TAB Commands.
1 is EDIT. A help page is dispayed on the screen when EDIT is
1 inverse bar below the help information at the top of the screen.
1 into this paragraph. When you have finished move the cursor to
1 into Basic B
1 insert mode works. Then press
1 in which you used the DELETE and SYMBOL SHIFT cursor and the
1 imain menu"
1 i a TASWORD TWO text file,
1 i T A S W O R D P L U S T H R E E T U T O R
1 holding the CAPS SHIFT key down and pressing the letter key.
1 helps ensure that you do not delete a paragraph accidentally.
1 have already learned how EDIT can be used to view the help page.
1 has been changed a lot and is a mess.
1 happens. Extend-J reforms from the line containing
1 for defaults
1 for correcting typing mistakes as they are made. It deletes the
1 first to the right side of the screen and then back to the left
1 first line of a block. The
1 finish at line (last)
1 experiment with the various control keys. In particular, study
1 entire paragraph is constantly rejustified as you type. Press
1 end and the next begin by turning the "page break" display on.
1 earliest convenience.
1 e the first line on a page when you
1 doing this by keeping the SYMBOL SHIFT and F key held down.
1 dline spacing (
1 dleft print margin (
1 display line appear.
1 designed to help you use the Tasword control keys.
1 delete the unwanteYMBOL SHIFT U now to insert some letters and words
1 define printer
1 define print
1 define page Layout L
1 dcontinuous/single C/S (
1 dTERor press EDIT to quit
1 dSpaces after full stops (
1 dRight margin (
1 dRAM disc size (
1 dPrint spooling Y/N (
1 dPen colour 2 (
1 dPaper colo
1 dNo. text lines on page (
1 dHeader - text (
1 dFooter - bot. paPLUS3DOS
1 dFile print character (
1 dData merge character (
1 dCDEFGHIJKLMNO
1 cursor to the next tab stop to the right. Try using the
1 containing the cursor.
1 containing the heading. Then press SYMBOL SHIFT W twice,
1 checK spelling K
1 characters in the above paragraphs then you will have spoilt the
1 character under the cursor. See how
1 character Translations T
1 character TO THE LEFT OF the cursor. XYZXYZ. Use it now to
1 change at the bottom of the screen as well as a page break
1 centering the following heading:
1 can see the "DELETE/INSERT" part of the help page.
1 cText - footer (
1 cLeft margin (
1 cFF after printing Y/N (
1 cCursor shape (
1 cBorder colour 2 (
1 cBorder colour 1 (
1 c#Track-Info
1 by holding a letter key down and watch what happens at the end
1 by entering Extended Mode and pressing the 1 key. Then turn help
1 bottom of the screen. Learn how auto-repeat works while you are
1 block rather than just moving it. The
1 blank line at the current cursor position. The SYMBOL SHIFT U
1 at columns 1 and 64 and then move the cursor into each of the
1 asks you to confirm that you want to delete the paragraph. This
1 as it is very easy to rejustify text.
1 as described in the help information.
1 arrows to position the cursor over the character and then type
1 and then press the C key).
1 and press the appropriate letter key. Some keys require both the
1 and key 1). This command is shown on the right hand side of the
1 and auto-insert mode.
1 above two paragraphs and hard rejustify them.
1 above line that should not be there.
1 a tab stop if there is one at the current position.
1 ____________________el
1 _ now to ensure that the margins are
1 _ command to reset the margins to
1 _ clear margins
1 ^ clear all
1 \@NYMenu confirmation Y/N (
1 Z key recovers the most recently deleted line and is called
1 Yours faithfully
1 You will move around the text file a lot as you use these keys.
1 You should be able to see SYMBOL SHIFT F and SYMBOL SHIFT
1 You might now like to go back and rejustify the two paragraphs
1 You might now like to try all the other cursor movement
1 You can scroll through the part of the help page shown at the
1 You can move blocks of your text about. The
1 You can even save a marked block of text using the
1 Y works by 123456 putting
1 Y word right
1 Y key (SYMBOL SHIFT and Y) also deletes a character but it
1 Y delete under
1 Y a few times.
1 Y !"#$%&'()*+
1 Y keys to confirm that their action is
1 X clear text
1 Wrong file type
1 With (just ENTER for find only):
1 W word-wrap on/off
1 W to define carriage return
1 W check word
1 W centre line
1 View text file option
1 VIDEO to scroll up. Try these keys now.
1 VIDEO and INV VIDEO to find the various commands on the help
1 V key is similiar - it marks the
1 Use the cursor moving arrows to move the cursor onto the line
1 Use the arrow keys to move the cursor up to line 100 and press
1 Unrecognised word found at:- Line:
1 U split line
1 Type word to be replaced/found:
1 Type sequence and press ENTER
1 Type in page number
1 Type in line number
1 Type in filename and press ENTrack-Info
1 Type file name and press ENTER.
1 Type char you wish to define a
1 Tutor informative and enjoyable. GOOD TASWORDING!
1 Try using So that you
1 Top page no. - header (
1 Too many codes entered (Max=32)
1 To learn about theTrack-Info
1 This line is 128 characters long. Hold the right arrow key down to read it all. This paragraph was
1 This is the end of Tasword Plus Two Tutor. You might like now to
1 This is a very short letter that we are using as an example of a
1 This is a line which should (perhaps) not be here.
1 This is a paragraph which
1 This Tasword Plus Three Readme file contains information which
1 This Tasword Plus Three Tutor is a text file that has been
1 There are two other useful ways of inserting text: insert mode
1 The word is outside the margins and cannot be rejustified.
1 The raised parts of the ruler line at the bottom of the screen
1 The help page shows many of the Tasword control keys prefixed by
1 The following pattern will help you find this part of IFT W by
1 The easiest way to correct a mis-typed kharacter is to use the
1 The Word Processor
1 The SYMBOL SHIFT W key centres text into the middle of the
1 The SYMBOL SHIFT I key is used to insert text by inserting a
1 The SYMBOL SHIFT E key moves the text that is to the right of
1 The DELETE key is useful for removing unwanted characters and
1 Thankyou for your letter of 16th August quoting for the repair
1 Thankyou for your interest in our new product range. I have
1 Tasword Plus
1 Tasword Data Merge.
1 Tasman Software hopes that you have found the Tasword Plus Three
1 Tas-spell not found, press ENTERto re-try or EDIT to quit.
1 TWO text file. Press Y for Yes if it isters but will not drive serial
1 TWO text file. Press Y for Yes if it isTrack-Info
1 TWO text file. Press Y for Yes if it is a TASWORD TWO text file,
1 TSPELL1.BINTSPELL2.BIN
1 TSPELL1.B!2P
1 TRUE VIDEO
1 TRUE VID saves as:
1 THIS IS A HEADING
1 TASWORD PLUS THREE TUTOR (C) Tasman Software Ltd 1987
1 TASWORD PLUS THREE
1 T word left
1 T and then the
1 T to return to Tasword
1 Special low cost group travel arrangements have been made for
1 Some printers are incompatible with the Spectrum +3 parallPLUS3DOS
1 Some printers are incompatible with the Spectrum +3 parall)n
1 Serial or Parallel S/P (
1 Selective or All? (
1 Segment full.
1 Save text file S
1 SYMBOL SHIFT G now to scroll back to the beginning of the tutor
1 SYMBOL SHIFT E and SYMBOL SHIFT Q keys to move the above message
1 SYMBOL SHIFT U will usually destroy the justification of a
1 STOP PRESSING SYMBOL SHIFT F
1 S to print Selected records
1 S to Skip this merge data
1 S save block
1 S 2nd character set
1 S to change Single Letter Trapping
1 Return to text file R
1 REPLACE? (Y/N) EDIT to quit
1 R r. justify on/off
1 R find/replace
1 Q to define linefeed
1 Q start of page
1 Q move text left
1 Put a formatted disc in drive A and press ENTER
1 Printer initialisation sequence
1 Print text file P
1 Press: P to Print with this data
1 Press: Y to clear text file
1 Press any key to continue
1 Press any key ...
1 Press SPACE bar to pause listing
1 Press ESC to abort.
1 Press ENTER for defaults
1 Press EDIT to return to menu.
1 Press EDIT to quit or any other key to continue
1 Press EDIT to exit to main menu
1 Position the cursor in the first line of this
1 Please insert the Tas-Spell discinto drive A and press any keywhen ready.
1 Pen colour 1 (
1 Pass: 1 Line: 1 Column: 1 Number Trapping: Off
1 PSNo. of stop bits (
1 PRINT WITH DATA MERGE
1 PRINT TXT
1 POKE____________________________________________
1 P goto page
1 P to change Printer
1 Once you have marked a block you move it by moving the cursor to
1 OL SHIFT D key moves the
1 O to turn auto-insert mode on and then type a few words with
1 O auto insert on/off
1 O again to turn auto-insert mode
1 O "paste block" key is
1 Now use the TRUE VIDEO or INV VIDEO key to ensure that the
1 Now use TRUE VIDEO to view the part of the help page that shows
1 Now use TRUE VIDEO or INV VIDEO to scroll the help display until
1 Now press INV VID to scroll the help display down sflash on which
1 No room for translation
1 No files found
1 Next segment not found.
1 New file name?
1 Name of text file for saving?
1 Name of text file for merging?
1 Name of text file for loading?
1 Name of text file for erasing?
1 Name of text file for Viewing?
1 Name of file for data merge?
1 NYprint page numbers Y/N (
1 NYprint header Y/N (
1 NYat top or bottom T/B (
1 NYUnlock help Y/N (
1 NYSuppress catalogue Y/N (
1 NYScreen edge scroll Y/N (
1 NADR2:DEFM
1 NADR1:DEFM
1 N find next
1 N change case
1 N to c
1 Mr. P. Monico
1 Mr. Hope U Buyit
1 Mis-spelt Words:
1 Merge text file M
1 Many of the control keys shown on the help page are prefixed by
1 MODE then SYMBOL SHIFT and H) will clear all the tab stops, and
1 MERGE DAT
1 M. Try moving this paragraph so that it is before the paragraph
1 M move block
1 M key except that it copies the
1 Ltd for details.
1 Load text file L
1 Leeds residents. Contact the Leeds office of Get There Coaches
1 Leeds LS2 9LN
1 LOCK again. Remember that capital letters can also be typed by
1 L to learn word.
1 L goto line
1 K rejust line (un=
1 K bytes free Drive
1 J to reform the paragraph.
1 J rejustify para (
1 J to reform the
1 Invalid symbol
1 Insert the dict
1 Insert mode is useful when you want to insert several lines of
1 Insert
1 Initialisation sequence I
1 Improper string expression
1 Ignore case? (
1 If you used the
1 If you have used DELETE and SYMBOL SHIFT Y to delete some
1 I to ignore word.
1 I insert on/off
1 I insert line
1 I (EXTEND MODE follod letters in this paragraph.
1 Hyde Terrace
1 H "hard rejustify" command will rejustify a paragraph into
1 General Manager
1 G scroll up
1 G fast scroll up
1 G described in the help segment at the top of the scrkey to be presses AND the SYMBOL SHIFT key.
1 Find word or part word (
1 Filename:
1 File too bi
1 File not found
1 File exists, delete? (Y/N)
1 FIND / FIND AND REPLACE
1 F scroll down
1 F fast scroll down
1 Extend Mode control keys shown in the help part of the screen.
1 Essex IG10 1TD
1 Error! - the data merge file is not readable
1 Error in numeric value
1 Erase file from disc E
1 Enter new word :-
1 Ensure the Tasword disc is in drive A,
1 Ensure that a TASWORD program disc is in drive A and press ENTER
1 EXTENDED CPC DSK File
1 ENTER to start Spelling Check
1 ENTER to retry, EDIT to quit
1 ENTER to re-specify file name
1 ENTER to proceed
1 ENTER to confirm or DEL to re-choose.
1 ENTEND MODE
1 END OF FILE. press any key to return to the main menu
1 EDIT to abandon save.
1 E to define form feed
1 E move text right
1 E key deletes an entire paragraph. Try this key now and you
1 E delete paragraph
1 Double comma detected
1 Disc in A is not a TASWORD program disc.
1 Define page layout
1 Define character translations
1 DICT34 BIN
1 DICT01.BIN>02
1 DELETE key deletes an entire line. Use it now to delete the
1 DELETE del. left
1 DELETE PARAGRAPH: CONFIRM? (Y/N)
1 DELETE BLOCK - CONFIRM? (Y/N)
1 DEL del line (un=
1 D tab right
1 D tab right
1 D deletes a marked block after asking for confirmation.
1 D delete block
1 D to Delete word from Dictionary
1 Customise program C
1 Customisation menu
1 Current Options: Printer: Number Trapping:
1 Current Options are : Printer: Number Trapping
1 Create a new one? (Y/N)
1 Configure printer C
1 Configure printer
1 Change program P
1 CSFF at page breaks Y/N (
1 CPDRead v3.24
1 CLEAR TEXT FILE
1 CAPS LOCK sets the capitals lock. Press it now and you will see
1 C to change word.
1 C key is similiar to the
1 C copy block (
1 C change window size GRAPH printer control
1 C "copy block____________________________________________
1 B to change drive.
1 B page break on/off
1 B mark start (
1 B key inserts a
1 B (EXTEND MODE key then press SYMBOL SHIFT and b) to turn the
1 Auto-insert mode is useful for inserting a few words into the
1 As you work through this tutor you should keep using EDIT, TRUE
1 An example of an Extended Mode control key is
1 A:tasspell.bin
1 A:TASTABLE.BIN
1 A useful key which saves you referring to the manual too often
1 A to print All records
1 A save/load/print
1 A next page
1 A control keys to move the cursor to the
1 ============================
1 =================
1 = will reset the default tab stops. Try all these commands.
1 = reset tabs
1 8 put footer
1 7 put header
1 6 get header
1 5 get footer
1 2rint footer Y/N (
1 1 turns the help display off and on. Try turning help off now
1 1 (Extend Mode
1 - will clear
1 - clear tab
1 + will set a new tab stop at the cursor position.
1 + set tab
1 )*+,./:;<=>?[\]^_`{|}~"
1 ) set right margin
1 (iv) Use the Tasword Customise PTrack-Info
1 (iv) Use the Tasword Customise P
1 (4) Driving Serial printers.
1 (3) Driving Parallel printers.
1 (2) Transferring text files from other Spectrum Taswords.
1 (1) Amendments to the program manual.
1 ( set left margin
1 &ionary disc and press any key.
1 &e you sure?
1 &T0532 742858
1 &T0532 438301
1 &T01 658 6350
1 &T01 508 5058
1 &NTransform Ltd
1 &NTasman Software Ltd
1 &NMicromend
1 &NCampbell Software Design Ltd
1 &ASpringfield House
1 &A8 Manor Drive
1 &A57 Trap's Hill
1 &A24 West Oak
1 &&N=Micromend
1 &"enter date".
1 "you should
1 "you must LOAD 'SERIAL'"
1 "ttc2.bin"
1 "the Tasword
1 "t2t3.bin"
1 "see the Tas
1 "replace tasword disc and press enter to continue":
1 "for details"
1 "enter new name for file":
1 "drive all serial printers"
1 "drive all parallel printers."
1 "and most parallel printers."
1 "You still have to use the"
1 "To drive serial printers"
1 "Text files must be 30k bytes maximum"
1 "TW2CODE.BIN"
1 "TSPELL1.BIN"
1 "Press enter to cTrack-Info
1 "PRINTFIX already installed.":
1 "It cannot drive serial printers."
1 "Is it a tasword two file":
1 "Failed to run program!":
1 "Customise Tasword option from"
1 "CURSOR MOVEMENT" part of the help page is showing at the top of
1 " is an unrecognised word.
1 " Place disc in drive a;wind
1 " key but leaves the block markers in
1 !hange Number Trapping
1 underline
1 typed with the right margin
1 to start again
1 to select baud rate and press ENTER
1 to return to menu
1 to change.
1 start of text
1 start of line
1 enlarged
1 end of text
1 end of line
1 emphasised
1 double str
1 condensed
1 chars free
1 Tasman Software Ltd 1987
1 23354,62: POKE 23355,16 <Enter>
1 1985 Tasman Software Ltd. v2.0
1 symbol means enter Extended Mode by pressing
1 symbol means hold down the SYMBOL SHIFT key
1 cursor is in as the
1 ***** *** **** * * **** **** ***
1 30Track-Info
1 * ***** *** * * * * * **** * *
1 * * * **** * * **** * * ***
1 * * * * * * * * * * * *
1 * * * * * * * * * * * * * *
1 Tasword Plus Three Data Merge facility you
1 N to quit this option
1 were at when this paragraph was typed. Then
1 use the
1 type the ( and ) characters you must hold
1 their default positions. Note that to
1 the SYMBOL SHIFT key down.
1 now to set the margins to the position they
1 left and right margins respectively at the
1 current cursor position. Use these commands
1 N:
1 M:
1 L:
1 K:
1 J:
1 I:
1 H:
1 G:
1 F:
1 E:
1 D:
1 (C) 1987 Tasman Software Ltd
1 TASWORD PLUS THREE
1 THE README FILE
1 Press any key to continue.
1
1